1.13.8. GCIS_SET_EVENTMSK Parameter Set

1.13.8. GCIS_SET_EVENTMSK Parameter Set

Table17 shows the parameter IDs for the GCIS_SET_EVENTMSK set ID. Some ISDN specific event masks do not have corresponding GC masks. All such masks are exposed through the parameter IDs shown.

.

Table 17. GCIS_SET_EVENTMSK Parameter IDs
Parameter ID Type Description

GCIS_PARM_ADDMSK int Enables notification of events specified in the bitmask in addition to previously set events. Valid masks are specified below.

GCISMSK_STATUS - Receiving GCEV_EXTENSION when a status message is received from the network. Default: Not enabled.

GCISMSK_STATUS_ENQUIRY - Receiving GCEV_EXTENSION when a status enquiry message is received from the network. When this event arrives, the application should respond with a status message using gc_SndMsg()/gc_Extension(). The firmware will not auto respond to this message. Default: Not enabled.

GCISMSK_TERMINATE - Delay RELEASE COMPLETE message until host application calls the gc_ReleaseCall( ) function. Default: Firmware does not wait for the gc_ReleaseCall() function and sends RELEASE COMPLETE when RELEASE is received.

GCISMSK_TMREXPEVENT - Receiving the GCEV_EXTENSION event when some timer expires at the firmware in Layer 3. Timer ID, Call ID and the value of the timer are returned. Default: Not enabled.

GCMSK_ALERTING - Receiving the GCEV_EXTENSION event when a ringback tone has been received from the remote central office and the called party's line is now ringing. Default: Not enabled.

GCMSK_PROC_SEND - Receiving the GCEV_EXTENSION event when the information is successfully sent. Default: Not enabled.

GCMSK_PROCEEDING - Receiving the GCEV_EXTENSION event when the call is sent out and enters the proceeding state. Default: Not enabled.

GCMSK_PROGRESS - Receiving the GCEV_EXTENSION event when an incoming progress message is received. Default: Not enabled.

GCMSK_SETUP_ACK - Receiving the GCEV_EXTENSION event when an incoming setup ACK message. Default: Not enabled.

GCIS_PARM_SETMSK int Enables notification of events specified in the bitmask and disables notification of previously set events. Valid masks are specified above for GCIS_PARM_ADDMSK.

GCIS_PARM_SUBMSK int Disables notification of events specified in the bitmask. Valid masks are specified above for GCIS_PARM_ADDMSK.

**Table 17. GCIS_SET_EVENTMSK Parameter IDs**
Parameter ID	Type	Description
GCIS_PARM_ADDMSK	int	Enables notification of events specified in the bitmask in addition to previously set events. Valid masks are specified below. GCISMSK_STATUS - Receiving GCEV_EXTENSION when a status message is received from the network. Default: Not enabled.
		GCISMSK_STATUS_ENQUIRY - Receiving GCEV_EXTENSION when a status enquiry message is received from the network. When this event arrives, the application should respond with a status message using gc_SndMsg()/gc_Extension(). The firmware will not auto respond to this message. Default: Not enabled.
		GCISMSK_TERMINATE - Delay RELEASE COMPLETE message until host application calls the gc_ReleaseCall( ) function. Default: Firmware does not wait for the gc_ReleaseCall() function and sends RELEASE COMPLETE when RELEASE is received.
		GCISMSK_TMREXPEVENT - Receiving the GCEV_EXTENSION event when some timer expires at the firmware in Layer 3. Timer ID, Call ID and the value of the timer are returned. Default: Not enabled.
		GCMSK_ALERTING - Receiving the GCEV_EXTENSION event when a ringback tone has been received from the remote central office and the called party's line is now ringing. Default: Not enabled.
		GCMSK_PROC_SEND - Receiving the GCEV_EXTENSION event when the information is successfully sent. Default: Not enabled.
		GCMSK_PROCEEDING - Receiving the GCEV_EXTENSION event when the call is sent out and enters the proceeding state. Default: Not enabled.
		GCMSK_PROGRESS - Receiving the GCEV_EXTENSION event when an incoming progress message is received. Default: Not enabled.
		GCMSK_SETUP_ACK - Receiving the GCEV_EXTENSION event when an incoming setup ACK message. Default: Not enabled.
GCIS_PARM_SETMSK	int	Enables notification of events specified in the bitmask and disables notification of previously set events. Valid masks are specified above for GCIS_PARM_ADDMSK.
GCIS_PARM_SUBMSK	int	Disables notification of events specified in the bitmask. Valid masks are specified above for GCIS_PARM_ADDMSK.

Click here to contact Dialogic Customer Engineering